| Papers [1-15] of 100 :: [Page 1 of 7] | | Go to page : 1 2 3 4 5 6 7 —> | Search results on "BICYCLE SAFETY": |
|
|
Bicycle Safety, 2008.
A lesson plan for a third grade class that aims to encourage the use of safety helmets for bicycles.
1,783 words (approx. 7.1 pages), 11 sources, MLA, $ 57.95
»
Click here to show/hide summary
Abstract
The paper develops an age and developmentally appropriate lesson plan for a third grade class to promote the use of safety helmets when riding bicycles. The paper describes how the lesson will encourage class participation and will use the inherent developmental characteristics of eight year-olds to belong to a group to provide positive peer pressure. The paper explains that the lesson is also designed to provide reasons why the wearing of helmets is necessary for personal safety and to prevent injury.
From the Paper
"There are 85 million bicycle riders in the United States, and 540,000 of them visited them emergency room, of those 67,000 had head injuries, 27,000 required hospitalization, and 45 to 85 percent of the brain injuries could have been prevented by a helmet. (Bicycle Helmet Safety Institute) About half of the bicycle deaths were children under 15. The use of helmets vary greatly in different sectors of society by orders of magnitude, white collar communities helmet use in children is approximately 80%, where inner-city children the use is closer to 10%. (Bicycle Helmet Safety Institute) The targeted community of Lacey, Washington would be classified as a white collar community with a white population of approximately 75% and a medium income of $43,848 (year 2000)."
| |
|
Aviation Safety: Error Management Versus Safety Compliance, 2002.
A look at the concepts and differences between error management and safety compliance in relation to aviation accidents.
650 words (approx. 2.6 pages), 2 sources, $ 26.95
»
Click here to show/hide summary
Abstract
This essay explains the difference between Error Management and Safety Compliance in aviation accidents. Error Management, it is argued, provides a greater likelihood for proactive outcomes when errors due occur. Because errors and accidents are impossible to eliminate, EM is premised on a complex information gathering system that allows those involved in accidents to better understand what happened. It creates a more intervention-focused environment for crew, and avoids issues of blame and punishment, and thus provides the crew with a different responsibility for error prevention.
| |
|
Safety Culture in Aviation, 2005.
A look at how distinct safety cultures influence safety performance.
2,954 words (approx. 11.8 pages), 13 sources, MLA, $ 87.95
»
Click here to show/hide summary
Abstract
This paper describes how different safety cultures in aviation have the potential to improve or worsen the safety performance of individual organisations. Recommendations are made in regard to the implementation and control of organisational safety culture to ensure safe practices through detailed engineering of workplace procedures and communication lines. The functionalist and interpretive perspectives of safety culture as described by Glendon (2000) are examined, demonstrating why the strengths of operating under an interpretive perspective within a functionalist framework are appropriate in the aviation industry. The importance of understanding the concepts of safety mission and safety involvement are considered. It is argued that, although difficult to categorically claim, there is little doubt that the differences in safety culture evident in the industry can have significant impact on an organisation's level of safety.
Outline
Abstract
Introduction and Background Why Safety Culture Is So Important In Aviation
Safety Cultures in Aviation
Conclusion and Implications
Reference List
From the Paper
"It is widely understood throughout the domains of aviation, medicine, defence and other safety-sensitive industries that maintaining an effective strategy to minimise the possibility and consequences of error is absolutely obligatory. Additionally, specific measures to manage the overall safety of operations can define an organisation's ability to operate viably (Glendon, 2000; Hudson, 2001; Reason, 1997). This does not just include the cost of error, but also an organisation's ability to determine risk and make decisions based on the assessment of risk. This paper identifies the steps management of aviation organisations can take to implement strategies to provide a positive safety culture within their organisation, encouraging both healthier safety attitudes and consequently, financial gain."
| |
|
Safety Analysis Techniques, 2002.
A review of different safety analysis techniques used in companies to examine the safety of their products.
3,094 words (approx. 12.4 pages), 10 sources, MLA, $ 90.95
»
Click here to show/hide summary
Abstract
This paper discusses the various safety analysis techniques employed by the companies and other research institutions world wide to testify the security and to minimize the risk factor involved in the use of their products. The paper begins by defining safety hazards and then lists common safety analysis techniques. The writer then discusses some of these techniques including Preliminary Hazard Analysis (PHA); Failure Modes and Effects Analysis (FMEA) and Fault Tree Analysis (FTA). It concludes with examining the factors which affect the length of safety analysis.
Introduction
Defining Safety Analysis or Hazard Analysis
Common Safety Analysis Techniques
Discussion on Some Safety Analysis Techniques
Preliminary Hazard Analysis (PHA)
Failure Modes and Effects Analysis (FMEA)
Fault Tree Analysis (FTA)
Factors Affecting the Length of Safety Analysis
Research Findings
Conclusion
From the Paper
"All the firms are legally bound to confirm their consumer's safety in terms of the usage of product. Nevertheless, the extent to which the management and the first-line supervisors take this liability seriously depends upon the organization's culture. Because, "an organization's culture consists of its values, beliefs, legends, rituals, mission, goals, performance measures and its sense of responsibility to its employees, customers and community, all of which are translated into a system of expected behavior. Senior management obtains, as a result of the organization's culture, the hazards-related incident experience that it establishes as acceptable. For the personnel in the organization, what is "acceptable" is their interpretation of the reality of what management does, which may differ from what management says" (Manuele, 1997, p.160 (5)). Thus, the management's commitment to product's safety is largely dependent upon the organizational culture. Therefore, it is the responsibility of the organization to take adequate measures to incorporate the much-needed values and the level of promise essential for an accurate safety analysis. Definition of the term safety analysis or hazard analysis will considerably assist the readers in comprehending the significance and the use of safety analysis techniques in the corporate world."
| |
|
The International Safety Management Code, 2003.
This paper takes a critical look at the International Safety Management Code and the need for a true safety culture in shipping.
4,262 words (approx. 17.0 pages), 17 sources, APA, $ 113.95
»
Click here to show/hide summary
Abstract
Recent marine accidents have resulted in significant human, pollution, and damage costs. This paper explains how the International Safety Management Code (ISM) seeks to improve personnel, operational, and environmental safety performance by providing a framework for effective safety management. ISM is based upon widely accepted quality and safety management methodology. It discusses how recent studies indicate the code is less than effective. Merely implementing the minimum requirements of ISM does not do enough to significantly enhance safety performance in the marine industry. The writer argues that international shippers must work towards achieving a true safety culture to ensure effective safety and environmental performance. This should be part of a company's global strategic plan.
From the Paper
"The International Safety Management (ISM) Code for the Safe Operation of Ships and for Pollution Prevention was introduced by the International Maritime Organization (IMO) in 1993 after several notable marine accidents (Anderson, 2002, p. 7) and the capsizing of the passenger ferry Herald of Free Enterprise which resulted in the loss of 193 lives (Rodriguez & Hubbard, 2001, 8; Sagen, 1999, p.58)."
| |
|
Rooftop Safety, 2005.
A report on rooftop safety, a major issue in workplace safety.
5,685 words (approx. 22.7 pages), 7 sources, MLA, $ 137.95
»
Click here to show/hide summary
Abstract
This paper presents a discussion of the various regulations in place regarding rooftop safety, as well as the safety equipment and programs used by contractors to ensure the safety of their workers. The paper also takes a look at how well different companies comply with the regulations in actual practice.
Rooftop Accidents
Standards
Informal Survey
Conclusion
From the Paper
"Surveys show the nature and incidence of different accidents in the workplace, and such statistics then serve as the impetus for further regulations, for tightening existing regulations, and for increased enforcement to reduce the problem. A report from 1988 showed how high the rate was at that time, and reports showed that the incidence rate of almost 20 occupational injuries and illnesses per 100 full?time workers in roofing and sheet metal work was much higher than that for all construction, the category considered the most hazardous major industry grouping."
| |
|
Workplace Safety, 2005.
A discussion regarding the necessity of safety in the workplace.
2,083 words (approx. 8.3 pages), 2 sources, MLA, $ 65.95
»
Click here to show/hide summary
Abstract
This paper discusses how it is vitally important that the workplace incorporate a safety program to ensure the well being of its employees, and indeed of all citizens living or moving within the premises of any specific workplace. The paper further discusses several issues of humanity that should be taken into account when formulating a workplace safety program.
Outline:
The Importance of a Well-Written Safety Program
Steps to Establish a Safety Program
Creating and Maintaining a Safety Program
The Role of Cultural Diversity in Workplace Safety
The Written Safety Program
Ensuring a Healthy Work Environment: Employee Assistance Programs
Other Issues: Public Safety
From the Paper
"Another important matter is how the variety of cultures integrate with the general corporate culture. Each organization distinguishes itself by means of culture, which is delineated by the values and norms to which the company adheres. These need to be integrated with the safety culture framework, and the implementation of the safety program."
"As part of the corporate culture, group norms have to be clearly delineated. This also should be integrated with the various languages and cultures within the workplace. It is important that each employee be able to function within a group, especially in terms of the safety program. This is another aspect that will ensure the longevity of such a program. This is especially true in cases where a large part of the workforce is not used to functioning as a group, and where the work is of such a nature that individuals within the company perform their duties alone. "
| |
|
Employee Safety, Health and Welfare Law, 2007.
This paper discusses employee safety, health and welfare in the US, focusing on the Occupational Safety and Health Act.
1,080 words (approx. 4.3 pages), 4 sources, MLA, $ 37.95
»
Click here to show/hide summary
Abstract
In this article, the writer provides a history and overview of the Occupational Safety and Health Act of 1970 (OSHA). The writer points out that this Act covers all American employers and their employees in occupations spanning the range from agriculture to manufacturing. Further, the writer explains that depending on the nature of the industry, OSHA standards may require that employers adopt a variety of practices, means, methods or processes that are deemed reasonably necessary and appropriate to protect workers on the job. The writer concludes that concerns about the new chemicals used in manufacturing, as well as the burgeoning arms manufacturing industry made safety legislation for American workers a pressing national concern.
From the Paper
"For example, compliance with safety standards may include ensuring that employees have been provided with, have been effectively trained on, and use personal protective equipment when required for safety or health. Whenever an employee must wear fire-retardant clothing or secure long hair when working over a kitchen grill, the employer is ensuring that he or she is compliant with OSHA. It is not only employees who are bound by OSHA - employees must also comply with all rules and regulations that apply to their own actions and conduct to ensure their own safety. An employee that refuses to secure his or her hair when working on a machine press is violating the law just as much as an employer that requires his or her employees to wear potentially dangerous clothing."
| |
|
Workplace Safety, 2007.
An examination of workplace safety improvements, including a discussion on the safety of the meatpacking industry.
942 words (approx. 3.8 pages), 4 sources, MLA, $ 33.95
»
Click here to show/hide summary
Abstract
The paper discusses how issues of workplace safety have become significant in the last 100 years. The paper examines the decline in work-related injured, which can be attributed to changes in labor relations; management attitudes; legislation regarding the treatment of workers; and perhaps most simple of all an understanding by workers that one should not have to endure a workplace fraught with danger simply because it may reduce overall costs, speed up production or deal with other financial issues. The paper further examines the meatpacking industry, noting that the Occupational Safety and Health Administration (OSHA) made a pledge that they would begin more stringent oversight of meatpacking and cleaning companies.
From the Paper
"All these issues will result in a greater bottom line for the meatpacking industry, which will either reduce company profits or increase the cost of the end product, essentially passing along the cost of compliance to the working man. While I have no doubt that these oppressive working conditions exist within the meat packing industry, I also believe that it will do little to help the workers to simply enact more legislation when previous legislation and published commitment on the part of OSHA, the government agency most specifically associated with workplace safety did little to improve the work place."
| |
|
Safety Guidelines in the Airline Industry, 2005.
The goal of this well-researched paper is to stress the importance of recognizing and removing potential safety hazards in both the airline industry and the military.
2,190 words (approx. 8.8 pages), 12 sources, MLA, $ 68.95
»
Click here to show/hide summary
Abstract
This paper details the standard safety guidelines that must be followed by both the airline industry and the military, as set forth by Occupational Safety and Health Administration (OSHA) and the Federal Aviation Administration (FAA). The writer examines the goals of OSHA and the FAA which is to ensure the safety and well-being of America's workers by regulating and enforcing specific standards, providing training and education while also encouraging constant improvements of safety standards in the workplace. This paper discusses the various areas of employment in the aviation industry including baggage handlers, forklift drivers and general ground crews. This paper also details the types of safety and health risks in the industry which include: Dangerous carbon dioxide levels, electrocution, vehicle injuries, ramp operation incidents as well as disruptive passengers. This paper discusses an incident in which two general ground workers died due to carbon monoxide poisoning, while refueling their vehicles. This paper also examines the various differences in the safety guidelines between the military and the airline industry as well as the logic behind the differences.
From the Paper
"Baggage handling can cause back injuries. Many times employees lift heavy baggage, which can eventually take its toll on airline workers. In addition, electrocution can occur on the flight line. For example, one man got electrocuted while he repaired airport runway lights. He was a 54-year old certified electrician of an electrical contracting company. According to the Center for Disease Control and Prevention (CDC), SARS is a viral respiratory illness caused by a corona virus, called SARS-associated corona virus (SARS-CoV). SARS was first reported in Asia in 2003. Over the next few months the illness spread to more than two dozen countries in North America, South America, Europe and Asia, before the SARS global outbreak of 2003 was contained (CDC, 2005). This disease is important for airline employees to become aware of and to learn proper safety measures to assist in avoiding such a disease from occurring, as it can be fatal."
| |
|
Workplace Safety, 2006.
The paper examines the importance of safety in the workplace with special reference to the construction industry.
1,756 words (approx. 7.0 pages), 2 sources, MLA, $ 56.95
»
Click here to show/hide summary
Abstract
The paper examines the importance of safety in the workplace with special reference to the construction industry. Safety plans are both important and beneficial to a company. Stringent safety measures can result in reduced workers' compensation claims and reduced expenses for the company. The paper discusses the benefits of implementing safety plans including higher morale and high levels of job satisfaction among the workers, elevating the productivity levels, decreased absenteeism and reduced insurance costs. Ethics in the workplace is also addressed, which help keep the productivity levels high and the company's good reputation. The paper also mentions that a company needs a policy statement in order to function efficiently and become successful. Accident reporting in the workplace and emergency plan are also discussed.
Table of Contents:
Safety Management in a Construction Company
Ethical Company and Environment
Company's Policy Statement
Safety and Health Plan
Accident Reporting
Emergency Plan
From the Paper
"Both a safety and health plan is necessary for a company to adopt. The safety plan would require the assignment of responsibility and the identification of the hazard and steps for its control. People within a company need to be trained on how to control a situation where an accident does occur. Such steps are important for a company to take in order to ensure a good safe environment. The health and safety plan need to be documented and the implementation and enforcement of the safety rules should be ensured. Unless there is implementation and enforcement, any type of a plan would fail regardless of how efficient it seems in theory. The company should also ensure the maintenance of a safe working environment and should address immediately to any concern that may negatively affect the safe working conditions. Appropriate correction actions should be taken by the company as soon as the need arises. Performance goals should be set and acting upon. To ensure a high morale and productivity regarding the safety guidelines, safety performance should be rewarded. This would help people work within such guidelines. Another important component of a safety plan is to review cases of accidents that do occur and to make a report of the circumstances. Then elements which led to the accident should be addressed in the appropriate way. To ensure the implementation, a company should set up safety performance objectives for all the levels of management and should include safety as a part of management performance review. Moreover the company should also measure the effectiveness of its safety plan."
| |
|
Fission Reactors and Safety Concerns, 2001.
Discusses the importance of safety at nuclear plants and how a lack of safety measures could lead to a Chernobyl-like disaster.
1,285 words (approx. 5.1 pages), 4 sources, APA, $ 43.95
»
Click here to show/hide summary
Abstract
This paper discusses the workings of fission reactor and focuses on the safety concerns connected with the production of nuclear power. The author looks at how most countries use nuclear energy for the development of military weapons though in some places it is also being used for peaceful purposes.
From the Paper
"Nuclear power plants are used in for the production of nuclear fission power, which is used later in the production of military weapons. For the production of power, fission reactor is used which contains fissionable elements which when bombarded with neutrons produce some other elements including barium, plutonium and uranium. All these are later used in the creation of military weapons and some other similar products. Though the governments of the world in possession of nuclear power come under attack often, it is nonetheless considered a symbol of power over other nations. A fission reactor is used to produce a chain reaction with the help of uranium and plutonium and special devices are used for the purpose of regulating the rate of fission."
| |
|
Occupational Safety, 2001.
This paper deals with safety issues that workers face in their jobs.
2,435 words (approx. 9.7 pages), 5 sources, MLA, $ 74.95
»
Click here to show/hide summary
Abstract
This paper looks at standards for emergency service workers in the United States. It focuses on two organizations and their work, the Occupational Safety and Health Administration (OSHA) which regulates standards for emergency service workers in the United States and the National Fire Protection Association (NFPA). Some of the safety issues of concern to firefighters, paramedics and health workers include respirator use, needlestick safety, safety codes for buildings containing hazardous materials, training methods and the monitoring of new technologies.
From the Paper
"To make the OSHA standards on respirators even more effective, the agency has also suggested a number of accompanying procedures, including a written plan with worksite-specific procedures to tailor program to each worksite; hazard evaluation to characterize respiratory hazards and conditions of work to assist in selecting appropriate respirators; medical evaluation to determine ability of workers to wear respirators; fit testing of tight-fitting respirators required to reduce faceseal leakage and ensure that the respirators provide adequate protection; training required to ensure that employees use respirators safely and periodic program evaluation required to ensure that respirator use continues to be effective (www.osha.gov). It should be clear from these OSHA regulations that while a great deal of the risks must be dealt with while actually fighting fires, a good deal of this risk can be reduced through thoughtful and thorough training procedures."
| |
|
Patient Safety in the Community, 2007.
This paper discusses the issue of patient safety in Canada's public health care system.
1,800 words (approx. 7.2 pages), 11 sources, MLA, $ 57.95
»
Click here to show/hide summary
Abstract
In this article, the writer notes that despite the rapid shift from institutional to community care, limited attention has been given to gauging or evaluating patient safety in the Canadian public sector. This paper sets out to define key terms in patient safety within the public health movement. The writer examines barriers that exist within the public health division and discusses significant patient safety issues. Further, the writer defines strategies for incorporating safety into the community arena and provides examples of current programs within the community that employ patient safety principles. The writer concludes that by preventing illness, injury and disease from adverse events, the sustainability of the publicly funded health care is strengthened as investments in prevention divert pressures over the long term.
From the Paper
"Changes brought on by the strains of the 21st century are revolutionizing the face of health care in Canada. Over the last ten years numerous countries including Canada have begun to focus on safety issues as pressures mount to target and reduce preventable injuries and death amongst patients. The epidemiological investigations that sparked these labors have demonstrated a consistently high level of error, although the spotlight has been almost exclusively on acute care settings. Surprisingly, most research has besieged regulated systems such as hospitals, even though literature shows a growing demand for home care services in Canada. Organized institutions such as hospitals are able to provide care with specialized professionals and support staff however the home care environment is much less controlled. Patient care is often supplied by unregulated healthcare personnel and family members in a location that was intended for living not for health care."
| |
|
Safety in the Chemical Industry, 2005.
A dissertation about the importance of safety in the chemical industry.
8,547 words (approx. 34.2 pages), 22 sources, MLA, $ 180.95
»
Click here to show/hide summary
Abstract
This research paper focuses on investigating the role of organizational change in the management of safety in the chemical industry with the primary objective of proofing that there is a relationship between organizational change and the potential for disaster.
The following issues are examined:Is there a correlation between the management system and safety? Can changes in management negatively affect safety? Has poor management been the cause of accidents, such as: Flixborough, Hickson & Welch, Ltd., etc.
Case studies and supportive materials are presented in this paper, which demonstrate the direct impact of an organization's structure on hazards and safety. Any type of management change can and does effect the implementation of operations.
Abstract
Introduction
Objectives
Methodology
Literature Review
Change Management Case Studies
Other Sources
Case Studies
Conclusions
From the Paper
"Many of the case study accidents can be linked back to some level of organizational/management change that was not in the best interest of the daily operations of the company. Too often disasters have occurred because there was no protocol for notifying another shift of what issues had taken place earlier. In some cases supervisors did not notify counterparts of their plans. In all cases, it was due to change-change in policy, change in management, change in procedures-all of which filter from the top down in an y organizational structure.
Roles and responsibilities must be clearly defined; policies and procedures must be more than just manuals they must be integrated and woven into the fabric of daily operations. Everyone must understand his/her role and carry it out.
Change must be communicated and processes set in place for maintaining what originally worked and identifying where changes need to be made. Change is inevitable in any industry but in an industry with such dramatic consequences there needs to be more caution about the changes that are made to the structure of an organization."
|
|
|
